7 inch LED Motorcycle Headlight Important Note: Our 7" motorcycle Headlight comes with mount bracket clamp,fits about 1.37-1.69 inch/34~42mm fork tubes in diameter,please remove the original/existed old mount bracket before install 7 inch led motorcycle Headlight,direct Fit whole original Headlight (include bracket but not circuit) 4 Lighting Models And Features Made With High Quality High Brightness LED Chips,Much Brighter Than Stock Light,Wider Beam and Further Down the Road. High Beam:When You are Driving in The Suburbs or Driving Without Street Lights,This 7 inch Motorcycle LED Headlight Provides You With a Further and Brighter Visual Range.Low Beam:Can Shine Broader/Wider on Road with Perfect Cut-line Pattern,Reduces the Height/Intensity of the Beam,Will Not Blind Other Drivers Eyes,Ensuring the Safety Driving Down Road. Turn Signals:The Great Upgrade Turn Signal of This 7 Inch Round Motorcycle Headlight is an Important Indicator of Vehicles Dynamic Information on Road.Designing with Amber Angel Eyes/Turn Signal,which is Highest Security Priority of This 7" Motorcycle Headlight,Will Forced Turning Yellow Even in DRL Mode,More Attractive,Easier for Other Drivers Noticed,Compliant and Safe.DRL:DRL are Necessary for Daytime Driving,this 7 Inch Round LED Motorcycle Headlight with LED Technology Provide a More Energy-Saving Driving Experience.With Super Sturdy Lens,Much Resistant and Durable Than Stock or Other Lights.Do Not Tear off The Protective Film During Installation to Prevent Scratches on the Lens Surface. Specification Dimension: 7 InchBeam Pattern: High Beam,Low Beam,DRL/Angle Eye,Turning Signal LightsLuminous Flux: 4000lumen for High Beam,2800lumen for Low BeamWaterproof: IP 67Housing: Aluminum AlloyColor Temperature: 1)Main High/Low Beam:6000K White 2)Turning Signal:3000k~3500K 3)DRL:6000K White Life Span: More than 50,000 hours Important Note: 1,Note for the not flashing TURNING SIGNAL LIGHTS of LED Headlight: *There is no module inside led Headlight that directly drives the turn signal lights flashing.*If the turn signals would just light up solid instead of flashing,[the turn signal on the led Headlight is powered by the motorcycle's original turning signals circuit],If this happens to you too then there's a couple solutions - Add the flasher or use the diode/resister solution. For the relay solution you need to locate where the relay is on your bike and disconnect it to figure out what kind of relay you need (a 2-prong vs a 3-prong for example).Any normal auto parts store should carry a compatible "electronic flasher", my stock flasher was black and squarish, but the round transparent bulb type was recommended to me by a store clerk and it worked great. This is a cleaner solution than the diode/resistor route which just looks messy but may be preferable over taking off fairings and having to lift the gas tank (as was required on my bike to get to the flasher). 2,Note for the clamp brackets can't perfect fit to fork: For Some Situations,The Clamp Brackets Can't Perfectly Fit/Conform to Your Forks But Some Squeezing With a Channel Lock Did The Trick Until the Bolts Were Secured and Tightened Down.Or You Can Purchase the Suitable Outer Diameter Size Mount Clamp Brackets Kit to Your Motorcycle Fork Which Just Fit About 1.37"-1.69"/34mm~42mm Fork Tubes Outer Diameters. 3,Note for None Plug and Play Circuit: The Light Was Not Completely Plug and Play But Some Very Simple Wiring Did The Trick.Or You Can Purchase Some Adapter Wire[Such as h4 to 9008,Dual h11 to h4.or Some Specially for Some Mode Front Light If It's Sale On-line] to Install. This 7" motorcycle comes with mount bracket which fit About 1.37 inch-1.69 inch/34mm~42mm Fork Tubes,Please remove the original/existed old mount Headlight and bracket of your motorcycle before install our product which will direct fit whole assembly of your original Front Light(include bracket but not original wiring) This 7 inch Motorcycle Kit Comes with H13-H4 plug: Fits any 12v motorcycle,such as Honda, Kawasaki, Suzuki, Yamaha, Triumph, Norton, BSA, Ducati and for H-arley motorcycles, custom Chopper, Bobber, Cafe racer etc. Directly fit your stock 5.75 inch or 7 inch round motorcycle Headlight. For some molds with other type plug,please buy it separately. Upgrade Design IP67 Waterproof IP67 Waterproof Designed, High transmission PC protective cover with tightly sealing, shield against rain drops, dust and sand. It can withstand any harsh abrasion and dirt. Breathing Hole Breathing hole designed for moisture release 1. Find the breathing hole back of the Headlight 2. Remove the breathing paper(don't throw it away) 3. Light on the lamp for about 1 hour,put the breathing paper back until the inside water vapor evaporated Increased Cooling Area Increased area of die-cast aluminum alloy design, the Headlight has better heat dissipation, and the lifespan is extended to 80,000 hours. Widely Application Fit For But Not Limited 7 inch LED Motorcycle Headlight Round Compatible with FXWG, FXDWG, and FXST models with 7" LED HeadlightCompatible with 2004-2014 Sportster XL883 XL1200Compatible with 2006-2011 VRSCD and VRSCDX;Compatible with 2004-later XL, 2015-later XG, 2009-2013 XR,Compatible with 1991-2017 Dyna (except FLD and 1991-2005 FXDWG)Compatible with 1984-1999 FLSTS and FXSTS,Compatible with 2008-2011 FLSTSB,Compatible with 2005-2006 FLSTSC,Compatible with 2010-2012 FLSTSECompatible with 2000-2017 FXCW, FXCWC, FXS, FXSB, FXSBSE, FXST, FXSTB, FXSTC and FXSTD models Other Motorcycle Models: Compatible with Honda CB400/CB1300/CB250/CB1100/CB450/CB919 HornetCompatible with Yamaha: 98-10 V Star 650 Classic & Silverado/00-09 V Star 1100 Classic & Silverado & 99-13 Road Star Models (except Warrior).Kawasaki, Suzuki, Chopper, Triumph, Cafe Racer, etc.IMPORTANT NOTE:If Your Motorcycle Uses AC Power, Please Install the Voltage Stabilizer Before Connecting The LED Headlight Power Supply.Due to Voltage Instability Caused Flicker and Short Life.
